Cleaning the automatic roll paper cutter, Cleaning the printer, Cleaning the exterior – Epson 2200 User Manual
Page 74
68
Maintaining Your Printer
Cleaning the Automatic Roll Paper Cutter
If you notice ink smears on the edges of pages cut using the automatic roll paper
cutter, you need to clean the cutter.
1. Turn on the printer.
2. Make sure roll paper is loaded (see page 12) and the cutter is installed (see
3. Windows: Right-click the
printer icon on your taskbar (in the lower right
corner of your screen), select
Printer Settings
, click the
Maintenance
tab, then
select
Printer and Option Information
.
Macintosh OS 8.6 to 9.x: Choose
File
>
Page Setup
or
.
Click the
utility button, then select
Printer Option Information
.
Macintosh OS X: Open the OS X
Applications
folder and select
EPSON
Printer Utility
. Then double-click
SP 2200
and select
Printer and Option
Information
.
4. Click the
Cutter Cleaning
button.
You see a screen like this:
5. Click the
Clean
button.
6. The printer prints on about three
inches of paper to clean the cutter.
Cleaning the Printer
To keep your printer working at its best, you should clean it several times a year.
Cleaning the Exterior
1. Turn off the printer, unplug the power cord, and disconnect the interface cable.
2. Remove all the paper, then use a soft brush to clean the paper feeders.
3. Clean the exterior of the printer with a soft, damp cloth.