Epson 2200 User Manual
Page 40
34
Printing From Start to Finish
5. Choose
Roll
as the Source setting. The Roll Paper Options dialog box pops up:
6. Select the roll paper settings based on the type of printing you’re doing, then
click
OK
:
7. Select the photo size as the
Size
setting.
Note: Don’t select any of these settings when printing on roll paper:
PhotoEnhance, Reverse Order, Rotate 180°, Centered or Minimize Margins, or
Sheet or Manual (for Source).
8. Click
OK
.
9. Click
OK
or
.
10. Follow the steps on page 39 to remove your printed photos.
Type of printing
Borderless
checkbox
Auto Cutter setting
Roll Paper Options
Print and cut
borderless photos
Checked
Normal Cut
(don’t select
Paper-Saving Cut; you
may see a small margin
or images may overlap)
Cut Sheet Mode
(don’t select Banner
Mode)
Print borderless
photos and cut
them yourself
Checked
Manual Cut
Cut Sheet Mode or
Banner Mode
Print photos,
panoramics, or
banners with
borders
Unchecked
Manual Cut or
Paper-Saving Cut (may
leave a small margin)
Banner Mode
(if you selected
Manual Cut, check
Save Roll Paper to
save paper at the
end of your print job)