Magnum Energy MMS-E Series - Manual (Page 41)

© 2011 Magnum Energy, Inc.
4.3 Resetting the Inverter
Under some fault conditions (i.e., an internal fault), the inverter will
need to be reset.
To reset the inverter:
1. Press and hold the Power ON/OFF pushbutton for approximately
15 seconds, or until the status LED comes on and fl ashes rapidly
(see Figure 4-1).
2. Release the Power ON/OFF pushbutton once the rapid fl ashing
has begun. The status LED will go off.
3. Press the Power ON/OFF pushbutton again to turn the
inverter on.
Info: The Power ON/OFF pushbutton is a small
momentary type switch which operates by lightly
pressing and releasing.
Figure 4-1, Resetting the Inverter
34
4.0 Maintenance and Troubleshooting
Power ON/OFF Pushbutton
Status LED
Indicator