Magnum Energy ME-G Series - Manual (Page 52)

Page 43
©
2015 Sensata Technologies
Appendix A - Specifi cations and Optional Equipment
A-2 Optional Equipment and Accessories
The following Sensata components are available for use with the ME-G Series inverter/charger.
Some of these items are required depending upon the intended use of the inverter.
Smart Battery Combiner
The Smart Battery Combiner (ME-SBC
TM ) is designed to monitor and charge a second battery using
a portion of the current that is charging the main battery. The ME-SBC eliminates a signifi cant
voltage drop, and provides automatic turn-on and turn-off based on adjustable voltage set-
points. This allows different batteries to be charged from a single charging source, and prevents
overcharging/undercharging.
Remote Switch Adapters
The ME-RSA
TM and ME-RSA-M TM pigtail adapters allow the inverter to be remotely switched on and
off—with or without the ME-RC50 remote display.
Basic Remote Control
The ME-RC50 Remote Control Panel is simple to use; an LCD screen and “at a glance” LEDs
display complete inverter/charger status. Soft keys provide simple access to menus and a rotary
encoder knob allows you to scroll through and select a wide range of settings such as: Inverter
ON/OFF, Charger ON/OFF, Shorepower Breaker Setting, AGS Control, as well as Meter, Setup and
Tech menus.
Advanced Remote Control
The ME-ARC50 Remote Control Panel uses an LCD screen and “at a glance” LEDs to provide
operating information and allow advanced features to be confi gured (requires Magnum inverters
with advanced confi gurable features). This LCD remote control also provides advanced monitoring/
troubleshooting and includes a FAVS button to access your favorite features quickly.
Auto Generator Start Controller
The ME-AGS-N Automatic Generator Start controller (Network version) is designed to automatically
start your generator based on low battery condition or high temperature. The AGS controller
includes an input voltage jumper (for 12, 24, and 48-volt battery banks) and a 4-position DIP
(Dual In-line Package) switch which provides the ability to change the relay timing confi gurations
to allow compatibility with a wider range of generators. Adjustable settings when using the ME-
ARC50 include starting the generator based on: Battery Voltage, Time Of Day, Battery ‘State of
Charge’ or High Temperature.
Battery Monitor Kit
The ME-BMK Battery Monitor Kit is a single battery bank amp-hour meter that monitors the
condition of the battery and provides information to let you know how much energy you have
available and let you plan your electrical usage to ensure the battery is not being over-discharged.
The ME-BMK-NS version does not include a DC shunt—order the ME-BMK to receive a 500A/50mv
DC shunt.
ME-CB and MPX-CB Conduit Boxes
The ME-CB and MPX-CB conduit boxes are provided for installations where the electrical code
requires AC and/or DC wiring to your inverter to be enclosed and protected.