KACO Powador-proLOG - Manual (Page 47)

Page 48 Operating Instructions Powador-proLOG_EN
10.2 Update via FTP
10.2.1 General information
These instructions are based on the example of Total Com-
mander software. Total Commander is a shareware fi le man-
ager. However, you can also apply the information in these
instructions to other FTP programs.
10.2.2 Instructions
To perform the update, you will need a Powador-proLOG, a PC
or laptop and the new software (which you can obtain via the
monitoring service).
ACTION
1. Unzip the new software (ZIP fi le).
2. Open the fi le “anlage.ini” (which you can fi nd in
path “ISTCONF\ANLAGE”) and enter the
serial number of your data logger.
3. Open Total Commander and press number
1, 2 or 3 (depending on what appears on the
start window).
4. Now set up a connection to the Powador-
proLOG by pressing the button “FTP” and
then the button New connection”.
Default settings: IP address “192.168.100.50”
User name: “admin”
Password: “admin”
ACTION
5. In the left-hand window, you will see the folders
for the current software. In the right-hand
window, select the path in which you saved the
new software.
6. Highlight the entire contents by keeping the right
mouse button held down, and press F5. A
mes sage will appear. You must confi rm this
mes sage with ““Overwrite all”.
ACTION
7. Once all the fi les have been overwritten, open
the HTML interface of the data logger. Enter
the following path in the address bar, after your
IP address: “html/de/confupload.html”.
8. Now press the “Restart” button.
After the restart, the process of installing the
new software will be complete.
ACTION
9. Now run the installation wizard in order to
reconfi gure the data logger.
S e c t i o n 1 0 · U p d a t e