Ion Science SF6 P1:p - Manual (Page 28)

SF6 P1:p MANUAL Ion Science Ltd
27 of 41
Unrivalled Detection. www.ionscience.com
Setting up the operating parameters
In case test specimen identification has not been made mandatory, the test specimen identification can be
entered but is not demanded from the operator.
To disable mandatory test specimen identification, touch the button [ NOT REQUIRED ]. A check mark in the
button confirms the deactivation.
Administration of the passwords
[ OPEN SUPERVISOR LEVEL] / [ ACCESS CODES ]
Here the passwords for the three access levels can be changed. On each level, a password having a length
of 1 to 5 digits can be entered.
When assigning a blank password, the corresponding level can be accessed without having to enter a
password. For this simply end the entry with a blank entry field. You are now requested to confirm the blank
password so as to avoid the possibility of making a mistake.
Special attention must be paid to changing the password for the supervisor level (SUPERVISOR LEVEL). If
the supervisor enters unintentionally a different password with respect to the one he wants to enter, he would
then have effectively excluded himself from any access. For this reason the supervisor password must be
entered twice. If both entries do not agree, then the program returns to the first entry.