Ion Science SF6 P1:p - Manual (Page 19)

SF6 P1:p MANUAL Ion Science Ltd
18 of 41
Unrivalled Detection. www.ionscience.com
Setting up the operating parameters
Pre-set passwords in the delivered state
In the delivered state, all passwords have been preset
to “000”. Details on how to change passwords are
provided in Chapter.
Setting volume and screen contrast
[ SET VOLUME / CONTRAST ]
Through the buttons [ + ] and [ - ] it is here possible to change the volume of the sound output (separately for
base unit and handset) as well as the screen contrast.
Operator level
(OPERATOR LEVEL)
In the operator level all functions have been combined which are accessible to the worker during
measurement operation. The operator level is reached from the main menu through the button [ OPEN
OPERATOR LEVEL ] and thereafter entering the operator password.
Entry of worker identification
[ OPEN OPERATOR LEVEL ] / [ OPERATOR ID ]
If on a subsequent data print out an identification of the worker shall appear, then here a name or a
corresponding identifier can be entered.
If the entry of a worker identification has been made mandatory then this entry screen will be displayed
automatically upon opening a new test specimen data set .
Also when the entry has not been made mandatory, the identifier can be entered at any time during
operation. This must be done BEFORE opening the test specimen dataset in which the identifier shall
appear.
Entry of test specimen identification
[ OPEN OPERATOR LEVEL ] / [ PRODUCT ID ]
If on a subsequent data printout an identification of the test specimen shall appear, then here a batch or
serial number can be entered.
If the entry of a test specimen identification has been made mandatory then this entry screen will be
displayed automatically upon opening a new dataset.
Also when the entry has not been made mandatory, the identifier can be entered at any time during
operation. This must be done BEFORE opening the test specimen dataset in which the identifier shall
appear.
Printing stored data
[ OPEN OPERATOR LEVEL ] / [ DATA PRINTOUT ]
If during the measurement, data has been saved by operating the TRIANGLE button at the handset, then
here outputting of the saved data through the serial interface can be initiated. If there exist data for several
test specimens in the memory, then a selection screen is displayed before the printing process starts where
the test specimen data sets which are to be printed can be selected. The button [ GO ] starts the printing
process, the button [ EXIT ] cancels the process and returns to the Measuring Mode.
Viewing of the saved data is possible through [ DATA MEMORY CONTROL ].
Data memory administration
[ OPEN OPERATOR LEVEL ] / [ DATA MEMORY CONTROL ]
This function can also be reached from the Measuring Mode (NOT the Search Mode) by pressing the red
triangle button longer. The more important options available here can also be controlled through the buttons
of the handset. Because of this it is possible during measurement operation to keep the transparent cover of
the touch screen closed and secured. Symbols corresponding to the buttons on the handset are displayed in
the respective buttons.
From here all administration functions for the measured data memory can be controlled. In addition, a
summary of the current memory usage is shown at the bottom of the screen.
The individual buttons are:
[ DATA PRINTOUT ] (or yellow circle button).
Starts a printout of the saved measurement data through the serial interface. Before, the test specimen date
sets which are to be printed out can be selected. When starting this through the button on the handset, no
selection is possible, in this case the entire memory contents are printed.