Yaskawa Sigma-5 User Manual: Setup for Linear Motors - Manual (Page 25)

2.1 Installation Environment and Applicable Standards
2-3
2
Installation
 Impact Resistance: The linear servomotor will with stand the following
impact acceleration.
 Installation site: An environment that satisfies the following conditions
• Indoors and free of corrosive or explosive gases
• Well-ventilated and free of dust and moisture
• Facilitates inspection and cleaning
• Free of high magnetic field
2.1.2 SERVOPACK Installation Environment
 Surrounding air temperature: 0 °C to 55°C
 Ambient humidity: 90% RH or less (with no condensation)
 Altitude: 1,000 m or less
 Vibration resistance: 4.9 m/s
2
 Shock resistance: 19.6 m/s
2
 Withstand voltage Voltage: 1,500 Vrms/m AC
Frequency: 50 or 60 Hz
 Installation Precautions
• Mounting in a Control Panel
To prevent the temperature around the SERVOPACK from exceeding 55 °C, take into
account the size of the control panel, the layout of the SERVOPACK, and the cooling
method. For details, refer to 2.4 SERVOPACK Installation.
• Mounting Near a Heating Unit
To prevent the temperature around the SERVOPACK from exceeding 55 °C, suppress
radiant heat from the heating unit and temperature rise due to convection.
Servomotor model Impact acceleration
SGLGW
SGLFW
SGLTW
196 m/s
2 × twice
SGLC 98 m/s
2 × twice