Yaskawa E7B Drive Bypass - Manual (Page 79)

Control Panel 3 - 15
- VERIFY - Modified Constants (Parameters) Menu
This menu is used to set/read only those parameters that have been modified from the Drive’s original factory default settings.
Follow the key operations below to access the Modified Constants (Parameters) Menu.
Note 1: If there are not any parameters that have been modified from their original factory default settings, then the display
will state “None Modified”. Otherwise, use the “increase” and “decrease” keys to scroll through the “Modified
Constants” (Parameters) list.
- A.TUNE - Auto-Tuning Menu
For E7 Bypass units Auto-Tuning can only be accomplished through the DriveWizard software (Part Number DWST616-C2).
A free download from www.drives.com.
This menu is used to auto-tune the Drive in order to utilize the bi-directional speed search feature. Follow the key operations
below to access the Auto-Tuning Menu.
Use and keys to scroll through the “Auto-Tuning” parameter list.
Auto-Tuning Parameters
T1-02 Mtr Rated Power
T1-04 Rated Current
-VERIFY-
** Main Menu **
- - - - - - - - - - - - - -
Modified Consts
See Note 1
x4
See Note 1
-A.TUNE-
** Main Menu **
- - - - - - - - - - - - - -
Auto-Tuning
-A.TUNE-
Mtr Rated Power
- - - - - - - - - - - - - - - - - - - -
T1- 02 = 0.40kW
(0.00~650.00)
“0.40kW”
x5