Yaskawa SI-EN3/V EtherNet/IP for V1000 Drive - Manual (Page 29)

5 Installation Procedure
YASKAWA ELECTRIC TOBP C730600 60A V1000 Option EtherNet/IP Installation Manual 29
15.
Attach the option cover by aligning the tabs with the mounting holes, seat the front
cover into place, and tighten the screw on the front.
Figure 19
Figure 20 Attach the Option Cover
Note: Take proper precautions when wiring the option so that the front covers will easily fit back onto
the drive. Make sure no cables are pinched between the front covers and the drive when
replacing the covers.
16.
Set drive parameters in Table 6 for proper option performance.
◆
EDS Files
For easy network implementation of drives equipped with the option, an EDS file can be
obtained from:
U.S.: http://www.yaskawa.com
Europe: http://www.yaskawa.eu.com
Japan: http://www.e-mechatronics.com
Other areas: Contact a Yaskawa representative.
Note: Download the EDS file for SI-EN3/V option. The SI-EN3/V will not function as a slave in the
network without the appropriate EDS file.
Tabs should line up
V1000
EtherNet_IM_E_conditional.fm 29 ページ ２０１２年３月１６日 金曜日 午後６時５分