Yaskawa SI-EN3/V EtherNet/IP for V1000 Drive - Manual (Page 14)

4 Option Components
14 YASKAWA ELECTRIC TOBP C730600 60A V1000 Option EtherNet/IP Installation Manual
◆
Option LED Display
The option has four LEDs:
Bi-color Status LEDs:
• Module status (MS) red/green
• Network status (NS) red/green
Green Ethernet LEDs:
• Network speed-10/100 (MS) green
• Link status and network activity-Link/Act (NS) red/green
The operational states of the option LEDs after the power-up diagnostic LED sequence is
completed are described in Table 4 . Wait at least 2 seconds for the power-up diagnostic
process to complete before verifying the states of the LEDs.
Table 4 Option LED States
Name
Indication
Operating Status Remarks
Color Status
MS
– OFF Power supply OFF
Power is not being supplied to the
drive
Green ON Option operating The option is operating normally
Green Flashing Option initializing
The option is configuring an IP
address
Red ON Fatal error occurred
The option has detected a fatal
(unrecoverable) error
Red Flashing Non-fatal error occurred
The option has detected a non-fatal
(recoverable) error
Green/Red Flashing Option self-test The option is in self-test mode
NS
– OFF Offline or Power supply OFF –
Green ON Online communications established
The option is online and has
established connections
Green Flashing
Online communications not
established The option is online without an
established connection
Red ON Communications error (fatal)
The option detected a duplicate IP
address
Red Flashing
Communications time-out (non-
fatal) A communications time-out
occurred
Green/Red Flashing Option self-test The option is in self-test mode
EtherNet_IM_E_conditional.fm 14 ページ ２０１２年３月１６日 金曜日 午後６時５分