Yaskawa SI-EN3/V EtherNet/IP for V1000 Drive - Manual (Page 10)

10 YASKAWA ELECTRIC TOBP C730600 60A V1000 Option EtherNet/IP Installation Manual
3 Receiving
3 Receiving
Please perform the following tasks upon receipt of the option:
• Inspect the option for damage. Contact the shipper immediately if the option appears
damaged upon receipt.
• Verify receipt of the correct model by checking the model number printed on the name
plate of the option package.
• Contact your supplier if you have received the wrong model or the option does not
function properly.
◆
Contents and Packaging
Table 2 Option Package Contents
◆
Tools Required for Installation
A Phillips screwdriver (M3, M3.5 to M6 metric or #1, #2 U.S. standard
<1>
) is required to
install the option.
Note: Tools required to prepare the option cables for wiring are not listed in this manual.
Description: Option Unit Ground Wire Warning Labels Installation Manual
_
Quantity: 1 4 1 1
<1> Screw sizes vary by drive capacity. Select a screwdriver that matches the drive capacity.
MANUAL
EtherNet_IM_E_conditional.fm 10 ページ ２０１２年３月１６日 金曜日 午後６時５分