Yaskawa SI-EN3/V EtherNet/IP for V1000 Drive - Manual (Page 28)

5 Installation Procedure
28 YASKAWA ELECTRIC TOBP C730600 60A V1000 Option EtherNet/IP Installation Manual
IGMP Snooping
Switches implementing IGMP Snooping are strongly recommended. When IGMP
Snooping is used, devices will only receive the multicast packets in which they are
interested.
Communication Cable Specifications
Only use cables recommended for EtherNet/Industrial Protocol (EtherNet/IP TM ).
Using a cable not specifically recommended may cause the option or drive to
malfunction.
The use of CAT5e or equivalent Shielded Twisted Pair (STP) cable is
recommended.
Refer to the ODVA website for more information on network cabling (http://
www.odva.org).
Connection Diagram
Figure 19 Wiring Diagram
<1> The ground wire provided in the option shipping package must be connected during installation.
V1000
M
U
V
W
R
S
T
SI-EN3/V
EtherNet/IP
Option
FE
<1>
EtherNet/IP Master EtherNet/IP Cable
Motor Power
V1000
EtherNet_IM_E_conditional.fm 28 ページ ２０１２年３月１６日 金曜日 午後６時５２分