Yaskawa YTerm - Manual (Page 37)

31
YTerm Software Manual
6. Choose the type of graph.
Three graph types are available:
• Time Graph - displays up to four (4) channels of data as a
function of time.
• Two Dimensional Data Graph - displays a plotted line as a
function of two (2) channels of data.
• Three Dimensional Data Graph - displays a plotted line as a
function of three (3) channels of data.
7. Define the data to be sampled. Click on the desired channel
tab. The dialog box appears as follows:
Figure 23: Storage Scope Parameters Channel Screen
8. Select Axis (or I/O) to sample. Select none if nothing is to be
stored on this channel).
9. Select the Data to be stored.
10. Select the Color of the line to be plotted.
11. Select the Thickness of the line to be plotted.
Note: Two Dimensional and Three Dimensional graphs' line color and
thickness is determined by the line color and thickness selected in
Channel #1.
12. Enter Engineering Units value.
Note: One (1) is the minimum engineering unit conversion. Use the
engineering units field to convert stored data from encoder counts to the
desired unit.