Yaskawa YTerm - Manual (Page 13)

7
YTerm Software Manual
Launching YTerm
To run YTerm, double click on the YTerm icon.
The following screen (Figure 4) will appear, while the application loads
indicating the version number and release date, and any user information
entered during the installation process.
Figure 4: YTerm Startup Splash Screen
This screen will display for a few seconds while the application loads. When
the application is loaded, it will attempt to establish communication with an
SMC. The connection will be based on previously saved communication
parameters. The first time the program runs, it will use the first free
communication port in the computer, and the connection will default to
19200 baud.