Yaskawa YTerm - Manual (Page 10)

4
YTerm Software Manual
Getting Started
Installing YTerm
Software Kit Contents
The YTerm software kit (SMCGUI1) should include the following:
• One CD ROM labeled 'YTerm SMC Development Environment.'
• The YTerm Software Manual, YEA-SIA-SMC-1.1.
• One programming serial cable, SMCCBL7.
• A Software Registration card.
If any of the YTerm items are missing or damaged, contact Customer
Service at Yaskawa Electric America for replacement, telephone number 1-
800-YASKAWA.
System Requirements
YTerm requires the following minimum PC system configuration:
• A Pentium 233 MHz, 32MB RAM.
• VGA resolution monitor.
• An asynchronous adapter (RS-232 Serial port) on the computer.
• Microsoft Windows 95, 98, NT, 2000, or XP.
Software Installation
Exit other programs as a precaution against a program conflict occurring the
first time the software is installed.
All the files required for setup are contained on the CD ROM. Before using
YTerm, run the YTerm YTERM.EXE program. This program decompresses
and copies the YTerm program and its associated files onto your PC hard
disk.
YTERM.EXE does not modify CONFIG.SYS, AUTOEXEC.BAT, WIN.INI
or SYSTEM.INI. It may update Windows components.