Yaskawa Ladder Works Programming Manual - Manual (Page 190)

9.7 Send Message Function (MSG-SND)
9-15
9.7 Send Message Function (MSG-SND)
[Outline]
Sends a message to the called station which is on the line and which is designated by the transmission
device type. Supports a plurality of protocol types.
The execution command (Execute) must be held until Complete or Error becomes ON.
[Transmission Devices ] CPU Module, 215IF, 217IF, 218IF, SV-01
[Protocols] MEMOBUS, non-procedural
[Format]
Symbol : MSG-SND
Full Name : Message Send
Category : SYSTEM
Icon :
[Parameter]
I/O
Definition
Parameter Name
I/O
Designation
Setting
Execute B-VAL Send message command
Abort B-VAL Send message forced interruption command
Type of transmission device Dev-Typ I-REG
CPU module = 8
218IF = 6 215IF = 1
SVB-01 = 11 217IF = 5
Pro-Typ I-REG Transmission protocol
MEMOBUS = 1
non-procedural = 2
Line No. Cir-No I-REG
CPU module = 1, 2
218IF = 1 to 8 215IF = 1 to 8
SVB-01 = 1 to 16 217IF = 1 to 24
Transmission buffer channel No. Ch-No I-REG
CPU module＝1, 2
218IF = 1 to 10 215IF = 1 to 13
SVB-01 = 1 to 8 217IF = 1
Input
Param Address input Head address of set data (MW, DW, #W)
Busy B-VAL Message is being sent.
Complete B-VAL The sending of the message has been completed.
Output
Error B-VAL Occurrence of error