Yaskawa Ladder Works Programming Manual - Manual (Page 119)

6.13 COPY WORD Instruction (COPYW)
6-22
6.13 COPY WORD Instruction (COPYW)
[Outline]
The COPYW instruction copies the designated number of words (Width) from the beginning of the
copy source register (Source) to the beginning of the copy destination register (Dest). The copy
process copies the entire block of data from the copy source to the copy destination. Even if there is
overlap between the copy source and the copy destination, the full copy data block is copied to the
copy destination.
[Format]
Symbol : COPYW
Full Name : Copy Word
Category : MOVE
Icon :
[Parameter]
Parameter Name Setting
Source · Any integer type register
· Any integer type register with subscript
Dest · Any integer type register (except for # and C registers)
· Any integer type register with subscript (except for # and C registers)
Width · Any integer type register
· Any integer type register with subscript
· Constant
[Program Example]
The word data of MW00000 to MW00009 are transferred to MW00100 to MW00109.
After
transfer
1032H
1133H
1234H
1841H
… …
1032H
1133H
1234H
1841H
… …
1842H 1842H
MW00001
MW00002
MW00008
MW00009
MW00100
MW00101
MW00102
MW00108
MW00109
MW00000