Yaskawa YASNAC PC NC Connecting Manual - Manual (Page 18)

YASNAC PCNC Connecting Manual Preface/Table of Contents
xvii
APPLICATION SAFETY PRECAUTIONS
CAUTION
• When operating the unit, be sure to observe the following electrical safety procedures
1.Do not touch the unit or terminal wire while the unit is operating.
2. Even though the unit has been turned OFF, it is still in charged status, so do not touch any
component parts for a minimum of five minutes.
Failure to observe this precaution could result in product failure, fire and/ or personal injury
or death due to electrical shock.
•
Do not mishandle, pinch or cause excessive stress to cables.
Excessive load on the cable could cause electric shock.
• While the unit is turned ON, never touch any rotating parts.
Failure to observe this precaution could result in personal injury.
Never modify the product
Free from explosive gases or steam
Free from oil,organic solvent,corrosive liquids etc.
Vibration under (0.5 G).
Never disassmble or modify the components of the unit.
Never change the set values of the components and any variable resistors used in control panel.
Failure to observe this warning could result product failure, fire and/ or personal injury
or death due to electrical shock.