Yaskawa YASNAC PC NC Connecting Manual - Manual (Page 143)

10 - 56
YASNAC PCNC Connecting Manual Chapter 10: Connection of General Purpose I/O
(b) Output Circuit
.
.
L
oad
JANCD-JSP02/JS0P04
+24V
60 mA
0V
0
24
-
+
FIGURE 10.3.2.12 Output Circuit
POINT
1. 56 outputs are non-contact polarity points (transistor, source driver), and limit the
current at ON up to 60mA (per circuit).When the load current of each output signal
might exceed 60mA, install a fuse of 0.1A for each circuit in order to protect the output
IC.
2. The I/O circuit of JSP02 and JSP04 boards is designed to have the following functions
or the devices in the operation panel (very close to the JSP02 or JSP04 board): reading
the operation switches, resistive load for LED indicators and for display devices.