Yaskawa YASNAC PC NC Connecting Manual - Manual (Page 10)

YASNAC PCNC Connecting Manual Preface/Table of Contents
ix
USING THIS MANUAL
This manual decribes the procedures for connecting the
`6TI68ÃQ8ÃI8 to machines, machine interfaces and
peripheral equipment.
Connections provided by the machine tool builder differ from the types provided in Yaskawa CNC enclo-
sures. Therefore, it may be necessary to make connection changes in accordance with the needs of standard
cabinets and integrated equipment.
The programmable controller system (hereafter called PLC) is installed in the
`6TI68ÃQ8ÃI8Ã unit.
For PLC details, refer to the
`6TI68ÃQ8ÃI8ÃPLC Programming Manual.
RELATED INFORMATION SOURCES
For additonal information, refer to the following manuals:
Title Of Document Contents
YASNAC PCNC Operating Manual
( YEA-SIA-C844-2.1 )
Basic configuration and operating procedures
also describes Human machine interface(HMI)
YASNAC PCNC Programming Manual
( YEA-SIA-C844-2.2 )
PCNC Program creation instructions
YASNAC PCNC PLC Programming Manual
( YEA-SIA-C844-0.1 )
PLC Program creation instructions
YASNAC PCNC I/O Signal Function
( YEA-SIA-C844-2.3 )
Describes functions between PCNC, PLC
and Machine Tool
YASNAC PCNC Connecting Manual
( YEA-SIA-C844-0.2 )
Instructions for connecting PCNC with machines,
machine interface and peripheral equipment
MEMOCON GL120,G130 120 Series I/O Module User’s Manual
(Document No. SIEZ-C825-20.22)
Describes I/O connections and power supply
specifications
MEMOCON GL120,G130 Hardware User’s Manual
(Document No. SIEZ-C825-20.1)
Describes the AC input power supply specifications for I/O.
YASNAC PCNC Maintenance Manual
( YEA-SIA-C844-2.9 )
Describes service and maintenance procedures.