Yaskawa CACR-SRxxBF - Manual (Page 51)

5 Maintenance, Inspection and Alarm/Warning Display
5-2
5.1 Status Display
The 7-segment LED (DS1) on the re-engineered AC SERVOPACK indicates the SERVOPACK status.
• When no alarm occurs, the bits are lit as shown in the table below.
• When an alarm occurs, the corresponding alarm code is displayed and blinks digit by digit for 250 msec.
Bit Data Indication
Item Bit Data Indication
c
Control Power ON Lights when the control power to the SERVOPACK turns ON.
d
Baseblock
Lights when baseblocked (the servo turns OFF.)
Goes out when the servo turns ON.
e
Rotation Detection
(/TGON)
Lights when the motor speed is higher than the value specified
in Pn502.
(Factory setting: 20 min
-1 )
c
d
e