Yaskawa A1000 - Manual (Page 34)

4 Comprehensive Parameter List
34 YASKAWA TM.A1000SW.064 Electronic Line Shaft with Alignment A1000 Custom Software Supplement
‹ H1: Multi-Function Digital Input Settings
F1-37
(3BD)
PG 2 Signal Selection
(PG2 Signal Sel)
Selects single-channel/quadrature detection mode for the PG option card 2
installed in port CN5-B.
0: A Pulse Detection
1: AB Pulse Detection
Default: 1
Range: 0, 1
Setting Description
80 Follower Disable
Closed: Follower mode (P1-01) is disabled and the follower drive will follow the normal frequency reference (based on b1-01
setting) and use the selected Accel/Decel times.
Note: ELS modes only.
81 Ratio 2 Select
Closed: Gear Ratio 2 (P1-07 and P1-08) is selected. When in ELS mode (P1-01 is set to 4 or 5), the follower drive will clear its
position error and follow the C1-03 and C1-04 Accel/Decel times to ramp to the new ratio. Upon reaching speed agree, the
position loop will re-enable.
82 Advance Follower
Closed: Follower position is advanced relative to the master encoder. No position error is accumulated. Refer to the
descriptions for parameters P2-04 and P2-05 for details.
Note: ELS modes only.
83 Retard Follower
Closed: Follower position is retarded relative to the master encoder. No position error is accumulated. Refer to the de scrip to
ins for parameters P2-04 and P2-05 for details.
Note: ELS modes only.
84
MOP Adjust Increase (MOP Adjust Inc)
Closed: The MOP ratio adjustment is increased. Refer to the descriptions for parameters P2-02 and P2-09 for details.
85
MOP Adjust Decrease (MOP Adjust Dec)
Closed: The MOP ratio adjustment is decreased. Refer to the descriptions for parameters P2-02 and P2-09 for details.
86
MOP Adjust Reset (MOP Adjust Reset)
Closed: The MOP ratio adjustment is reset to zero. Refer to the descriptions for parameters P2-02 and P2-09 for details.
No.
(Addr.
Hex)
Name
(Digital Operator Display)
Description Values
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM
V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV V/f
OLV/PM
V/f w PG
AOLV/PM
OLV
CLV/PM
CLV
OLV/PM AOLV/PM CLV/PM OLV/PM AOLV/PM CLV/PM