SMA SB 3600SE-10 Service Manual - Manual (Page 11)

3 Cleaning the Inverter
Damage to the display or the type label due to the use of cleaning agents
• If the inverter is dirty, clean the enclosure, the cooling fins, the enclosure lid, the type label,
the display and the LEDs using only water and a cloth.
• If the cooling fins on the rear of the enclosure are dirty, clean them using a soft brush.
• If the air ducts on the top of the inverter are dirty, clean them using a soft brush.
• If the protective cover of the Battery Pack is dirty, clean it with a dry cloth.
• If the Battery Pack is dirty, clean it with a dry cloth.
3 Cleaning the Inverter SMA Solar Technology AG
Service Manual 11 SB36-50SE-SG-en-10