HEIDENHAIN TNC 620 (73498x-02) - Manual (Page 526)

MOD functions
17.5 Software numbers
17
526
TNC 620 | User's Manual
HEIDENHAIN Conversational Programming | 5/2013
17.5 Software numbers
Application
The following software numbers are displayed on the TNC screen
after the "Software version" MOD function has been selected:
Control model: Designation of the control (managed by
HEIDENHAIN)
NC software : Number of the NC software (managed by
HEIDENHAIN)
NCK : Number of the NC software (managed by
HEIDENHAIN)
PLC software : Number or name of the PLC software
(managed by your machine tool builder)
In the "FCL information" MOD function, the TNC shows the
following information:
Development level (FCL=Feature Content Level):
Development level of the software installed on the control, See
"Feature Content Level (upgrade functions)", page 11
17.6 Entering the code number
Application
The TNC requires a code number for the following functions:
Function Code number
Selecting user parameters 123
Configuring an Ethernet card NET123
Enabling special functions for Q parameter
programming 555343