HEIDENHAIN TNC 620 (340 56x-02) ISO programming - Manual (Page 403)

HEIDENHAIN TNC 620 403
16.1 Mac
h
ine-Specific User P
a
ra
met
e
rs
Calling the configuration editor
U Select the Programming mode of operation.
U Press the MOD key.
U Enter the code number 123.
U Press the END soft key to exit the configuration editor.
The icon at the beginning of each line in the parameter tree shows
additional information about this line. The icons have the following
meanings:
„ Branch exists but is closed
„ Branch is open
„ Empty object, cannot be opened
„ Initialized machine parameter
„ Uninitialized (optional) machine parameter
„ Can be read but not edited
„ Cannot be read or edited