HEIDENHAIN TNC 620 (340 56x-02) ISO programming - Manual (Page 363)

HEIDENHAIN TNC 620 363
14.1 Gr
aphics
Repeating graphic simulation
A part program can be graphically simulated as often as desired, either
with the complete workpiece or with a detail of it.
Function Soft key
Restore workpiece blank to the detail
magnification in which it was last shown.
Reset detail magnification so that the machined
workpiece or workpiece blank is displayed as it
was programmed with BLK FORM.
With the WINDOW BLK FORM soft key, you return the
displayed workpiece blank to its originally programmed
dimensions, even after isolating a detail without
TRANSFER DETAIL.