HEIDENHAIN TNC 620 (340 56x-02) ISO programming - Manual (Page 402)

402 Tables and Overviews
16.1 Mac
h
ine-Specific User P
a
ra
met
e
rs
16.1 Machine-Specific User
Parameters
Application
To enable you to set machine-specific functions, your machine tool
builder can define which machine parameters are available as user
parameters. Furthermore, your machine tool builder can integrate
additional machine parameters, which are not described in the
following, into the TNC.
The parameter values are entered in the configuration editor.
Each parameter object has a name (e.g. CfgDisplayLanguage) that
gives information about the parameters it contains. Each object has a
key for unique identification.
Refer to your machine manual.
If you are in the configuration editor for the user
parameters, you can change the display of the existing
parameters. In the default setting, the parameters are
displayed with short, explanatory texts. To display the
actual system names of the parameters, press the key for
the screen layout and then the SHOW SYSTEM NAME
soft key. Follow the same procedure to return to the
standard display.