HEIDENHAIN iTNC 530 (340 49x-05) ISO programming - Manual (Page 532)

532 MOD Functions
1
7.6 Ether
n
et Int
e
rf
ace
Network settings specific to the device
U Press the soft key DEFINE MOUNT to enter the network settings
for a specific device. You can define any number of network
settings, but you can manage only seven at one time
Setting Meaning
MOUNTDEVICE „ Connection via NFS:
Name of the directory that is to be
logged on. This is formed by the network
address of the server, a colon and the
name of the directory to be mounted.
Input: four numerical values separated
by points. Ask your network specialist for
the values, e.g. 160.1.13.4. Directory of
the NFS server that you wish to connect
to the TNC. Be sure to differentiate
between small and capital letters when
entering the path
„ Connection via smb:
Enter the network name and the share
name of the computer, e.g.
//PC1791NT/C
MOUNTPOINT Name that the TNC shows in the file
manager for a connected device.
Remember that the name must end with a
colon. Maximum length = 8 characters; the
special characters _ - $ % & # are
permitted
FILESYSTEMTYPE File system type.
NFS:
Network File System
SMB: Server Message Block (Windows
protocol)