HEIDENHAIN CNC Pilot 4290 Description of the Y axis - Manual (Page 52)

Y Axis 52
Centric polygons
Parameters
Q: Number of sides (Q ‡ 2)
K: Width across flats (inscribed circle diameter)
Ki: Length of side
B: Width (reference: reference edge Z)
■ B<0: Surface in negative Z direction
■ B>0: Surface in positive Z direction
4.1.2
Contours
in
the
XY
Plane
(Front
and
Back)
Single surface
Parameters
Ki: Depth (of material to be milled)
K: Residual depth (remaining material)
B: Width (reference: reference edge Z)
■ B<0: Surface in negative Z direction
■ B>0: Surface in positive Z direction
Y_4290BH.pm6 08.03.2005, 08:37 52