beautypg.com

3y axis in simulation – HEIDENHAIN CNC Pilot 4290 Description of the Y axis User Manual

Page 43

background image

HEIDENHAIN CNC PILOT 4290

43

Surface window

The contour display and traverse-path display in the

surface window are oriented to the position on the

”unrolled” lateral surface (designation: CY) and the

Z coordinates.

3

Y

Axis

in

Simulation

Front window

In the front window, the contour and traverse paths

are shown in the XY plane, taking the spindle

position into account. The spindle position 0° is

located on the positive X axis (designation: ”XK”).
”Side view (YZ)” window

In the ”side view” window, contour and traverse

paths are shown in the YZ plane. The side view

depicts only the Y and Z coordinates – not the

spindle position.

Y_4290BH.pm6

08.03.2005, 08:36

43

See also other documents in the category HEIDENHAIN Equipment: