HEIDENHAIN CNC Pilot 4290 Description of the Y axis - Manual (Page 36)

Y Axis 36
N58 G147 I2 K4
N59 G843 NS11 P3 U0.5 V0.5
N60 G0 X69.7 Z3 Y0
N61 G14 Q1
N62 M105
[Milling - Surface - Lateral surface]
N63 G19
N64 G197 S1000 G193 F0.1 M103 T5
N65 G0 X106 Z-39 Y0
N66 G147 I2 K2
N67 G841 NS19 P5 U0.5 V0.5
N68 G0 X106 Z-39 Y0
N69 G14 Q1
N70 M105
[ Milling - Pocket - Front face ]
N71 G17
N72 G197 S1061 G193 F0.1 M103 T11
N73 G0 X8 Z3 Y0
N74 G147 I2 K2
N75 G845 NS13 P3 U0.5 V0.5 H1 Q0
N76 G0 X8 Z3 Y0
N77 G14 Q1
N78 M105
[ Milling - Pocket - Lateral surface ]
N79 G19
N80 G197 S1061 G193 F0.1 M103 T7
N81 G0 X106 Z-12 Y0
N82 G147 I2 K2
N83 G845 NS16 P3 U0.5 V0.5 H1 Q0
N84 G0 X106 Z-12 Y0
N85 G147 I2 K2
N86 G845 NS24 P1 U0.5 V0.5 H1 Q0
N87 G0 X106 Z-12 Y0
N88 G14 Q1
N89 M105
N90 G18
N91 M15
N92 M30
ENDE [END] Set safety clearances for milling
Centric polygon milling (roughing)
Switch off milling tool (spindle 1)
Activate the YZ plane
Bring radial drilling and slot milling tool into position
Mill single surface (roughing)
Bring axial drilling and slot milling tool into position
Mill the polygon on the front face as a ”pocket”
Activate the YZ plane
Bring radial drilling and slot milling tool into position
Mill linear slot on the lateral surface as a ”pocket”
Mill the ”free contour” on the single surface as a ”pocket”
Activate the XZ plane (turning)
Switch off the C axis
2.4.1
Milling
with
the
Y
Axis
Y_4290BH.pm6 08.03.2005, 08:36 36