Input/output of parameter and, Compensation value lists – HEIDENHAIN ND 231 B v.2 User Manual
Page 42

42
With the ENT key, you transmit the
compensation-value list for axis 2 over the
RS-232-C/V.24 interface. After transmission,
return to the beginning ("TRANSFER") to
transmit or receive more lists. Continue in the
data transfer menu with the decimal point
key.
With the ENT key, you transmit the
compensation-value list for axis 1 over the
RS-232-C/V.24 interface. After transmission,
return to the beginning ("TRANSFER") to
transmit or receive more lists. Continue in the
data transfer menu with the decimal point
key.
Press the ENT key if you want to transmit
the parameter list over the RS-232-C/V.24
interface. After transmission, return to the
beginning ("TRANSFER") to transmit or
receive further lists. Press the decimal
point key to continue in the data tansfer
menu
Input/Output of Parameter and Compensation-Value
Lists
To call the "data transfer" function:
Select the operating parameters.
together
with
Select P00 CODE.
P00 CODE
MOD
Enter the code number 48 61 53 and
confirm with ENT.
Data transfer function:
TRANSFER
SEND PARAM.
If
reqd.
or
Continue with ENT.
REC. PARAM.
The display unit is ready to receive a
parameter list over the RS-232-C/V.24
interface. After successful reception of the
parameter list, the display unit resets itself
and restarts. Continue in the data transfer
menu with the decimal point key.
If
reqd.
or
SEND CMP.1
If
reqd.
or
Input/Output
of
Parameter
and
Compensation-Value
L
ists
If
reqd.
or
SEND CMP.2