Grass Valley SME-1901 v.1.20 - Manual (Page 30)

GUIDE TO INSTALLATION AND OPERATION
26 | SME-1901 / 1911
6 Specifications
ELECTRICAL INPUT
Signal: 3Gbps/HD/SD-SDI SMPTE 424M, 292M, and 259M-C compliant
Supports data rates of: 270, 1483.5, 1485, 2967, 2970 Mbps
Cable length * (Belden 1694A): 3 Gbps: 110 m (360 ft) at 3 Gbps
HD: 200 m (655 ft) at 1.5 Gbps
SD: 400 m (1310 ft) at 270 Mbps
Return loss *: >15 dB for up to 1.5 GHz
>10 dB from 1.5 GHz to 3 GHz
IP INPUT/OUTPUT
Quantity: 1
Connector: 100 Mbps Ethernet with RJ45 connector IEEE 802.3
PROCESSING PERFORMANCE: IP Streaming
Signal path: 8 bits
Compression: H.264 high profile (level 4.0)
Frame rate: Full rate of input signal – except 3G is half the rate
Bitrate: 256 Kb/s to 5 Mb/s
Audio encoding: AAC, MPEG-1 Layer II
ELECTRICAL OUTPUTS (6) (SME-1901 only)
Signal: 3Gbps/HD/SD-SDI SMPTE 424M, 292M, and 259M-C compliant
Supports data rates of: 270, 1483.5, 1485, 2967, 2970 Mbps
Return loss: >15 dB for up to 1.5 GHz
>10 dB from 1.5 GHz to 3 GHz
Jitter (wideband): HD/SD: <0.2 UI
3 Gbps: <0.3 UI
Rise / fall time: HD: 135 ps max., 20 % to 80 %
SD: 400 - 800 ps, 20 % to 80 %
PROCESSING PERFORMANCE: DA section (SME-1901 only)
Signal path: 10 bits
Latency: <6 ns
ELECTRICAL
Power: SME-1901 10 W
SME-1911 9 W
* Cable length and return loss specifications will be reduced when using the output protected by the bypass relay on
SME-1901-3SRP-R rears.