Grass Valley SME-1901 v.1.20 - Manual (Page 24)

GUIDE TO INSTALLATION AND OPERATION
20 | SME-1901 / 1911
Click Save to store the current parameter settings and values from the SME-1901 or SME-1911 into the selected User
Preset. The existing contents of the preset will be overwritten.
Profiles
This section provides the option to save and recover the entire card configuration (including user presets if desired) on
an external disk, or to copy it to another SME-1901 or SME-1911 card.
Note: although the SME-1901 and SME-1911 are very similar in most aspects of their operation, the profiles for
these cards are NOT interchangeable, and you must use the card-specific file in the following procedure.
Click on Profiles to open the Profile Copy window.
Copy profile from
This line shows this SME-1901 or SME-1911 card, and identifies it by App server, Densité frame and slot number,
card type and firmware version.
The Profile column has a pulldown that allows you to select
which profiles you will work with, and gives these choices:
• Current, User1, User2, User3, User4, User5, All
The Select column includes a checkbox (preselected checked)
to confirm that you want to work with the current card.
Save Profile to Disk…
Click this button to open a Save dialog allowing you to specify a
file name and location to which the selected profiles for this card
will be saved.
Hint - It is a good idea to create a folder for these files, because
they are not explicitly identified as SME-1901 or SME-1911
profiles, and will be difficult to find and identify if not clearly
named and conveniently located.
Figure 5-13 Profile Copy window
Figure 5-14 Save Profile to Disk dialog