Grass Valley PDR 200 Installation - Manual (Page 59)

Connecting SCSI Devices
Profile Video File Server Installation 2-29
Figure 2-23. Example 3: Profile Video File Server to PLS 200 Connections
Example 3 (Figure 2-23) shows connection of a Profile Library System (PLS200) to
a Profile Video File Server equipped with a Slave EDR. This example allows
archiving material on the Profile Video File Server to the PLS200 through the SCSI B
and SCSI D buses. The System SCSI board at Profile Video File Server Slot J4
provides control signal for the library robot.
NOTE: This example requires attachment of SCSI Terminators on the PLS200 as
shown in Figure 2-23.
9676-44
SCSI
B
SCSI
D
J4
Terminator
SCSI Cable
PLS200
Profile Video File Server
SCSI Jumper
Note:
Disk recorder board locations may be
different than shown. See rear panel
labels for actual locations.