Grass Valley PDR 200 Installation - Manual (Page 42)

Chapter 2 Mechanical Installation
2-12 Profile Video File Server Installation
Connecting Analog Composite Monitor
The Profile Video File Server may include an Analog Composite Monitor board
which provides four channels of analog composite video output with time code
burn-in and text overlay. With this board you can simultaneously display independent
time code of each playback channel on a picture monitor display. Each channel also
provides text overlay for source identification.
Figure 2-12 shows composite monitor cable connections for a typical location, slot
J12. Refer to the rear panel labels or Tables 1-2 through 1-6 in Chapter 1, pages 1-9
through 1-13, to determine the slot location of this board in your system.
1. Place an EMI gasket on each BNC connector as shown in Figure 2-6, page 2-7.
2. Attach four BNC cables for composite video outputs to the OUT A, OUT B,
OUT C, and OUT D connectors.
Figure 2-12. Analog Composite Monitor Cable Connections
J1 J17 J13 J16 J15 J14 J6 J7 J4 J3 J2 J5 J12 J11 J9 J8 J10
9676-60
Out B
Out A
Out C
Out D
Video Out
Analog Composite (Monitor)