Grass Valley PDR 200 Installation - Manual (Page 101)

SCSI Connector
Profile Video File Server Installation B-5
SCSI Connector
The Profile Video File Server provides a number of 68-pin SCSI interface connectors
at the rear panel, including the one on the SCSI board which is reserved for the
PLS200 Library System.
For a 2-channel Profile, SCSI interfaces are identified as:
SCSI A - Master EDR board rear panel connector
SCSI B - Rear Panel connector
For a 4-channel Profile, SCSI interfaces are identified as:
SCSI A - Master EDR board rear panel connector
SCSI B - Rear Panel connector
SCSI C - Slave EDR board rear panel connector
SCSI D - Rear Panel connector
All SCSI connectors have the same pin-outs. This includes an internal SCSI interface
that is used with the disk drives that are resident within the Profile Video File Server.
Figure B-5 shows a SCSI connector and Table B-5 lists the pin-outs.
Note that in Table B-5, signals preceded by a dash (-) indicate signals that are true,
asserted, and active when low.
Figure B-5. 68 Pin SCSI Connector
1 35
34 68