Grass Valley PDR 200 Installation - Manual (Page 2)

Copyright Copyright © 2000 Grass Valley Group Inc. All rights reserved. Printed in the United States of
America.
This document may not be copied in whole or in part, or otherwise reproduced except as
specifically permitted under U.S. copyright law, without the prior written consent of Grass Valley
Group Inc., P.O. Box 59900, Nevada City, California 95959-7900
Trademarks Grass Valley, GRASS VALLEY GROUP, Profile and Profile XP are either registered trademarks
or trademarks of Grass Valley Group in the United States and/or other countries. Other trademarks
used in this document are either registered trademarks or trademarks of the manufacturers or
vendors of the associated products. Grass Valley Group products are covered by U.S. and foreign
patents, issued and pending. Additional information regarding
Grass Valley Group's trademarks and other proprietary rights may be found at
www.grassvalleygroup.com.
Disclaimer Product options and specifications subject to change without notice. The information in this manual
is furnished for informational use only, is subject to change without notice, and should not be
construed as a commitment by Grass Valley Group. Grass Valley Group assumes no responsibility
or liability for any errors or inaccuracies that may appear in this publication.
U.S. Government
Restricted Rights
Legend Use, duplication, or disclosure by the United States Government is subject to restrictions as set
forth in subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software clause at
DFARS 252.277-7013 or in subparagraph c(1) and (2) of the Commercial Computer Software
Restricted Rights clause at FAR 52.227-19, as applicable. Manufacturer is Grass Valley Group
Inc., P.O. Box 59900, Nevada City, California 95959-7900 U.S.A.
Revision Status
REV DATE DESCRIPTION
April, 1997 Initial release of Installation Manual 070-9676-00
May, 1997 Procedure change, roll Part Number to 070-9676-01
September, 1997 Add Analog Composite I/O and Monitor Boards, remove Fibre Channel
user information, roll P/N to 070-9676-02
January, 1998 Change slot positions for systems above S/N B030000, roll P/N to
070-9676-03
June, 1998 Added PDR300 with MPEG, PDR200 slot positions change for systems
above S/N B040000, roll P/N to 070-9676-04.
October, 1998 Added support for PDR 200 Option DV and PDR 304. Roll P/N to
070-9676-05.
November, 1998 Modified sections to support changes to the CPU board for PDR 200
systems above S/N B050000 and PDR 300 systems above S/N B020000.
Roll P/N to 070-9676-06.
December, 1998 Modified sections to support 18GByte drives, for PDR200 systems above
S/N B060000 and PDR 300 systems above S/N B030000.
Roll P/N to 070-9676-07.
April, 1999 Modified manual title and added support for the PDR 400 with DVCPRO.
Roll P/N to 070-9676-08
October, 1999 Added six-channel DVCPRO support. Roll P/N to 070-9676-09.
March 23, 2000 Added DVCPRO 50 support. New P/N to 071-8005-00.