Grass Valley PDR v.2.1 - Manual (Page 77)

Input and Output Mapping
Profile Family 61
Output Mapping
The Output Mapping tab is used for mapping output channels to Profile disk
channels. The channels don’t have to be mapped to an audio type at all times,
as with input mapping, but channels may be in a mapped or unmapped state. If
analog or AES/EBU audio types present, they are always mapped to their
associated channels. These audio types cannot be unmapped. Channels may be
mapped to multiple audio types, but of these only one can be a serial digital
embedded or SDI audio type.
To map output channels:
1. Choose Options | Audio Configuration . The Audio Configuration dialog box
appears (Figure 38).
2. Click the Output Mapping tab.
3. Click on a button in a column. This displays a list containing analog,
AES/EBU, or SDI audio groups. Unavailable audio groups appear dimmed.
4. Click on the group of channels you want. The audio channel may be mapped
to any of the outputs in groups of four.
5. Click OK to accept your changes or click another tab.