Grass Valley PDR v.2.1 - Manual (Page 74)

Chapter 2 Using the Profile Configuration Manager
58 Profile Family
Audio Configuration for the PDR200
The Audio Configuration dialog box shown in Figure 37 allows you to map
input and output channels, input clocking, audio quality and monitor channels.
Input and Output Mapping
The Input Mapping tab is used for mapping input channels to Profile unit
channels, while the
Output Mapping tab is used for mapping output channels. For
example, you can map Profile Audio Chassis (PAC) input channels and serial
digital audio input channels. Figure 37 and Figure 38 illustrate a Profile unit
with an audio signal processing board, a PAC 208 chassis, and two serial digital
cards providing eight analog audio channels, eight digital audio channels, and
four video channels with 16 embedded audio channels each.
Figure 37. Audio Configuration dialog box, Input Mapping tab