Grass Valley PDR v.2.1 - Manual (Page 19)

What to Read First
Profile Family 3
The PDR100 and PDR200 are supported by the following products:
• PDX103 and PDX208 Profile Disk Expansion Units
• PAC208 and PAC216 Analog/Digital Interface chassis (PDR200 only)
• XLR216 and BNC216 Digital Interface chassis (PDR200 only)
• PRS200 Profile RAID Storage System (3 to 96 hours of storage)
• PLS200 Profile Library System
• PRC100 Profile Remote Control unit
• LVS100 Live Controller
• PDRFCD CD-ROM Drive
• Profile Tool Box application software
• Profile TimeDelay application software
NOTE: Version 2.1 is supported by Windows® NT™ 3.51 and 4.0.
What to Read First
The order in which you should read the chapters of this manual depends on how
you want to set up your Profile system.
• Before using your Profile unit, you must first configure your video and audio
resources. Refer to Chapter 2, “Using the Profile Configuration Manager.”
• If you are upgrading a PDR100 to version 2.1 of Profile system software
from version 1.4.XX or earlier, you must rebuild your file system. Refer to
Chapter 4, “Using the Profile Disk Utility.”
• Once you have configured your video and audio resources, and rebuilt your
file system, if necessary, you are ready to capture and replay video and audio
clips. Refer to Chapter 3, “Using VdrPanel.”
• To read Profile logs, access your Profile system from a remote PC, or attach
a PRC100 Profile Control Panel, refer to Chapter 5, “Using Profile
Utilities.”