Grass Valley PDR v.2.1 - Manual (Page 30)

Chapter 2 Using the Profile Configuration Manager
14 Profile Family
Setting Master Timecode
From the Master VITC Setting dialog box, you can conveniently view and
change VITC settings for genlock and all available inputs and outputs from a
single location. To set the master timecode (VITC) settings:
1. Choose Options | Master Timecode or click the Master Timecode button on
the toolbar. The Master VITC Setting dialog box appears (Figure 9).
Figure 9. Master Timecode dialog box, genlock settings
2. The VITC Present status indicator should be on (green). If VITC Present is
not on, use one of the following options:
• Manual VITC detection (four-channel LTC version of the reference genlock
board [only manual option available for PDR200]):
- Verify Automatic VITC detect is not selected. If it is, click to toggle it.
- Set VITC Reader Line1 to the expected location of the first Reader Line