Grass Valley PDR v.2.1 - Manual (Page 48)

Chapter 2 Using the Profile Configuration Manager
32 Profile Family
Component Analog Video Input
To open the Analog Component Video Input (CAV) dialog box, select Video
Input from the configuration tree, and then click or double-click an analog
component input from the list, such as CAV-InA-J9.
Figure 17. Component Analog Video Input dialog box (CAV)
Status Indicators
Display the current status of the Genlock input: Video Present, VITC Present,
and Auto Timed. The green light indicates the particular status is on. These
indicators cannot be edited.
Overwritable Video Standard
Changes the video standard for this input board: NTSC/525 or PAL/625. If you
change this standard, you must restart all tools that use this channel. The board
can serve both standards, but the input can only accept one at a time.