Grass Valley PDR v.2.1 - Manual (Page 20)

Chapter 1 Introducing the Profile Family
4 Profile Family
Starting Your Profile System
Once the unit is properly installed, your ready to log in. For instructions on how
to install and power-on either a PDR100 or PDR200, see the unit’s installation
manual.
To log in automatically:
1. Power up the Profile unit, and the start up routine begins. During normal start
up, you are logged in automatically and the VdrPanel application starts. You
can hold down the Shift key during start up to interrupt the automatic log in
process.
NOTE: If you stop the automatic log in, or if it fails, the Windows NT
log in screen appears. When logging in, remember that Windows NT
is case-sensitive: enter the username and password in lowercase
letters.
To manually log in:
1. At the Windows NT log in screen, enter the username: profile
2. Use the Tab key to advance to the From field. If your domain name or local
computer name is not displayed in the box, click in the box to access a list of
choices. Select your domain or local computer name from the list.
3. Use the Tab key to advance to the password field.
4. The password appears as asterisks (*) for password security. For the
password, enter: profile
5. Click on OK or press Enter.
NOTE: If a log in error message appears, and all the information is
correct, try deleting the password and clicking
OK .