Grass Valley PDR v.2.1 - Manual (Page 69)

Digital Audio Input
Profile Family 53
If you want to bypass the sample rate converter:
1. In the Digital Audio Input dialog box, click the Sample Rate Converter tab
(Figure 32). By default, the sample rate converter is enabled. The sample rate
converter affects all four channel inputs.
Figure 32. Digital Audio Input dialog box, Sample Rate Converter tab
2. Click the Bypass Sample Rate Converter box.
NOTE: Do not bypass sample rate conversion unless you are certain
that all inputs and outputs are synchronous.
3. After you have disabled the sample rate converter, click Close or another tab.