Grass Valley PDR v.2.1 - Manual (Page 102)

Chapter 3 Using VdrPanel
86 Profile Family
Setting Timecode Crosspoints
The Timecode Crosspoint dialog box controls the connections of timecode
signals within the Profile system.
• Timecode inputs (top-left corner) represent either LTC input connectors on
the back panel or VITC input signals. Timecode inputs can be connected to
timecode recorders for recording onto disk.
• Timecode generators (below timecode inputs) represent timecode generators
used by the panels. Timecode generators can be connected to timecode
recorders for recording onto disk or to timecode outputs.
• Timecode outputs (top-right corner) represent either LTC output connectors
on the back panel, or VITC output signals. Timecode outputs can be
connected to timecode recorders for playback of recorded material from
disk, to timecode inputs, or to timecode generators.
1. Select Window | Timecode Crosspoint to open the Timecode Crosspoint
dialog box. The green boxes indicate the current connections. For example,
a green box at the intersection of TCRec#1 and GenlockVITC-InA-J16
indicates the timecode signal from the back panel input is recorded by
timecode recorder #1.