Grass Valley PDR v.2.1 - Manual (Page 108)

Chapter 3 Using VdrPanel
92 Profile Family
24. Go to Clip Beginning jumps to the beginning of the current clip.
25. Shuttle Bar sets the Shuttle Rate . Use the mouse to drag the pointer to the
desired Shuttle Rate (displayed in the Shuttle Rate box). When you click on
the shuttle bar, the disk recorder enters shuttle mode.
26. Shuttle Rate displays the current shuttle rate. This number ranges from
–16.00 to +16.00, with the positive numbers indicating forward motion,
negative numbers reverse, and 0.00 still. This number can be set by clicking
on the
Shuttle Rate to open the Shuttle Rate dialog box, or by dragging the
Shuttle Bar to the desired position. If Shuttle Rate is set faster than the
maximum rate for the controller, the maximum rate is displayed.
27. Clip Name Box lists the names of the clips in the current group or clip list.
The functions on the Panel dialog box can be accessed directly by clicking on
the appropriate button with the mouse or by using the shortcut keys shown in
Table 7. For example, pressing
r starts recording in the active panel.
Table 7. VdrPanel shortcut keys
Shortcut Key Function Shortcut Key Function
r Record Ctrl
+ →
Forward 100 Fields
w Rewind Ctrl
+ ←
Back 100 Fields
s Stop j or
↓
Jog controls
p or
↑
Play e Go to Clip End
f Fast Forward h Shuttle controls
spacebar Stop t Go to Clip Beginning
→
Forward 1 Field i Set Mark In
←
Back 1 Field o Set Mark Out (not zero)
Shift
+ →
Forward 10 Fields c Trim to Mark In
Shift
+ ←
Back 10 Fields u Trim to Mark Out