Grass Valley PDR v.2.1 - Manual (Page 127)

Loading Microcode
Profile Family 111
Loading Microcode
To load microcode for your hard disks:
1. Choose Disk Utilities | Load Microcode or click the Load Microcode button
to open this dialog box:
Figure 68. Microcode Filename to Load dialog box
2. Double-click on a filename or enter the name of the microcode (.lod) file in
the Filename box and click Open to load the microcode.
NOTE: Currently, the microcode file cu4w6001.lod is the most up-to-
date for 4 gigabyte Seagate drives. The file cu9wd309.lod is the most
up-to-date for 9 gigabyte Seagate drives.