Grass Valley NV9608 v.1.0 - Manual (Page 69)

NV9616 Control Panel • User’s Guide 59
6. Technical Details
Defaults
Defaults
Initial Panel State
Destination: the configured default.
Buttons: low-tally is 40% brightness by default and stays at its most recent setting.
Configuration Page
The initial NV9616 or NV9608 configuration has no buttons defined. The default panel options are:
Panel type: X-Y/Multidestination.
Default mode: Multi-destination.
Release mode: Normal.
Default destination: None.
Preset monitor: None
Status monitor: None
XY data routing: Automatic.
MD data routing: Automatic.
Default name set: System names
Multi-dest device limit: 16
Use continuous scroll: Enabled (check box checked)
All other options: Disabled (check boxes clear).
DHCP
The panel is set up to respond to DHCP from the factory. It is possible to assign the panel a fixed IP
address using the Panel IP Configuration Utility.
Drawings
The drawings that follow identify features and provide overall and critical dimensions.